Unified Search
JP EN
Sample horizontal type strong X-ray diffractometer RINT-TTR III
IAE
57 Institute of Advanced Energy North Building 2 (partially located in the DuET experiment building in North Building 1)
Institute of Advanced Energy North Building 2 (partially located in the DuET experiment building in North Building 1) Institute of Advanced Energy North Building 2 (partially located in the DuET experiment building in North Building 1)
Close a map

Sample horizontal type strong X-ray diffractometer RINT-TTR III

Model
RINT-TTR III
Manufacturer
Rigaku Corporation
Specification
The RINT-UltimaIII is the top-of-the-line model of Rigaku X-ray diffractometers, maintaining the multifunctionality of the RINT-UltimaIII but upgrading the X-ray source to a powerful rotating cathode type X-ray source. The RINT-UltimaIII can be easily switched from the general measurement of powder and thin-film materials to in-situ measurement in different temperature and humidity atmospheres, the small-angle measurement for the particle size distribution of low-k films, and the in-plane measurement for evaluation of thin-film samples of a few nm, etc., depending on the sample, measurement technique, and purpose.
Location
Institute of Advanced Energy North Building 2 (partially located in the DuET experiment building in North Building 1)
Installation Year
2006
Check on the map
Print the map
Overview

The RINT-UltimaIII is the top-of-the-line model of Rigaku X-ray diffractometers, maintaining the multifunctionality of the RINT-UltimaIII but upgrading the X-ray source to a powerful rotating cathode type X-ray source. The RINT-UltimaIII can be easily switched from the general measurement of powder and thin-film materials to in-situ measurement in different temperature and humidity atmospheres, the small-angle measurement for the particle size distribution of low-k films, and the in-plane measurement for evaluation of thin-film samples of a few nm, etc., depending on the sample, measurement technique, and purpose.

Responsible department

Installation Location 57 North Building 2 (partially located in the DuET experiment building in North Building 1)

Available Users

Kyoto University
Use -by-the-hour
Accepted only between 9 am and 5 pm off campus

Other Research Institutes
Use -by-the-hour
Accepted only between 9 am and 5 pm off campus

Companies, etc.
Public offering

Notes

Person of Kyoto University：Please contact the person in charge.

Usage rules

Others：Project Zero Emission Energy Research　Please contact the person in charge.（(Paid use and use under a joint research agreement are available.)
※ For details on how to apply, please refer to the device’s website.
http://www.iae.kyoto-u.ac.jp/zero_emission/

Inquiries

Advanced Energy Conversion Division Advanced Energy Structural Materials Research Section（Contact:Omura)
TEL
0774-38-3568
MAIL
ohmura.takamasa.2r*kyoto-u.ac.jp　
※Please change 「*」 to 「@」 and send.

USACO/Katsura Yui/MaCBES
Unified Search
USACO website
TOP